Monthly Archives: December 2024

Problems adding two Lenovo Displays to MacBook Pro Mx via Lenovo ThinkPad Docking Station

Posted on by
Reply

I’ve bought a ThinkPad Docking-Station from Lenovo and two Lenovo 27″ Displays but if I connected the USB-C Cable of the Docking Station to the MacBook Pro the displays keep black. No Singnal 🙁 – Direct Connection of one of the Displays to the HDMI-Port of the MacBook worked fine,m so I expected to have a problem with the Docking-Station.

After searching around I’ve found this software from Synaptics called DIsplayLink. Check the details on their page.

After installing and giving access to the system the displays are working and everything is fine. as long as I have seen, the software is free.

Getting a 1 TB MicroSD-Card into your Bambu Lab X1C

Posted on by
Reply

Bambu Labs MicroSD-Card-Slot at the lower right of the display can handle 1 TB MicroSD-Cards but will fail to format them in the machine itself, so the MicroSD-Card needs to be formatted outside of the 3D-Printer itself. You’ll run into an timeout if you try and nothing can fix this at the moment.

I took my MicroSD-Card and inserted it into my Macbook Pros SD-Card-Slot with the MicroSD-Card to SD-Adapter which was delivered with the MicroSD-Card. Format the Card with FAT! No ExFAT or other formats. FAT only!

Insert the MicroSD-Card into your 3D-Printer and it will show you the free space on the card. So now you have a 1TB storage space for your models and videorecordings.